Update bash_completion

Previously, nghttpx will use only one single thread inside the worker
process if --workers=1 (this is default).  If --workers=N, N > 1, we
use additional threads for accepting connections, or API request
processing, etc.

With this commit, we use the same processing model for N > 1 even if N
== 1.  To restore the original single thread execution mode,
--single-worker option is added.  If threading is disabled
--single-worker is always true.

AUTHORS

@@ -17,11 +17,14 @@ github issues [2].
 Alek Storm
 Alex Nalivko
 Alexis La Goutte
+Amir Pakdel
 Anders Bakken
 Andreas Pohl
 Andy Davies
 Ant Bryan
 Benedikt Christoph Wolters
+Benedikt Christoph Wolters
+Bernard Spil
 Bernard Spil
 Brian Card
 Brian Suh
@@ -71,6 +74,7 @@ Tatsuhiko Kubo
 Tatsuhiro Tsujikawa
 Tom Harwood
 Tomasz Buchert
+Tomasz Torcz
 Vernon Tang
 Viacheslav Biriukov
 Viktor Szépe
@@ -80,6 +84,7 @@ Zhuoyun Wei
 acesso
 ayanamist
 bxshi
+clemahieu
 dalf
 es
 fangdingjun

CMakeLists.txt

@@ -24,13 +24,13 @@
 
 cmake_minimum_required(VERSION 3.0)
 # XXX using 1.8.90 instead of 1.9.0-DEV
-project(nghttp2 VERSION 1.19.90)
+project(nghttp2 VERSION 1.20.0)
 
 # See versioning rule:
 #  http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
-set(LT_CURRENT  26)
-set(LT_REVISION 4)
-set(LT_AGE      12)
+set(LT_CURRENT  27)
+set(LT_REVISION 0)
+set(LT_AGE      13)
 
 set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
 include(Version)

README.rst

@@ -81,11 +81,19 @@ To enable the SPDY protocol in the application program ``nghttpx`` and
 
 * spdylay >= 1.3.2
 
+We no longer recommend to build nghttp2 with SPDY protocol support
+enabled.  SPDY support will be removed soon.
+
 To enable ``-a`` option (getting linked assets from the downloaded
 resource) in ``nghttp``, the following package is required:
 
 * libxml2 >= 2.7.7
 
+To enable systemd support in nghttpx, the following package is
+required:
+
+* libsystemd-dev >= 209
+
 The HPACK tools require the following package:
 
 * jansson >= 2.5
@@ -115,15 +123,17 @@ The Python bindings require the following packages:
 * python >= 2.7
 * python-setuptools
 
-If you are using Ubuntu 14.04 LTS (trusty) or Debian 7.0 (wheezy) and above run the following to install the needed packages:
+If you are using Ubuntu 16.04 LTS (Xenial Xerus) or Debian 8 (jessie)
+and above, run the following to install the required packages:
 
 .. code-block:: text
 
     sudo apt-get install g++ make binutils autoconf automake autotools-dev libtool pkg-config \
       zlib1g-dev libcunit1-dev libssl-dev libxml2-dev libev-dev libevent-dev libjansson-dev \
-      libc-ares-dev libjemalloc-dev cython python3-dev python-setuptools
+      libc-ares-dev libjemalloc-dev libsystemd-dev libspdylay-dev \
+      cython python3-dev python-setuptools
 
-From Ubuntu 15.10, spdylay has been available as a package named
+Since Ubuntu 15.10, spdylay has been available as a package named
 `libspdylay-dev`.  For the earlier Ubuntu release, you need to build
 it yourself: http://tatsuhiro-t.github.io/spdylay/
 

configure.ac

@@ -25,7 +25,7 @@ dnl Do not change user variables!
 dnl http://www.gnu.org/software/automake/manual/html_node/Flag-Variables-Ordering.html
 
 AC_PREREQ(2.61)
-AC_INIT([nghttp2], [1.20.0-DEV], [t-tujikawa@users.sourceforge.net])
+AC_INIT([nghttp2], [1.20.0], [t-tujikawa@users.sourceforge.net])
 AC_CONFIG_AUX_DIR([.])
 AC_CONFIG_MACRO_DIR([m4])
 AC_CONFIG_HEADERS([config.h])
@@ -44,9 +44,9 @@ m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
 
 dnl See versioning rule:
 dnl  http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
-AC_SUBST(LT_CURRENT, 26)
-AC_SUBST(LT_REVISION, 4)
-AC_SUBST(LT_AGE, 12)
+AC_SUBST(LT_CURRENT, 27)
+AC_SUBST(LT_REVISION, 0)
+AC_SUBST(LT_AGE, 13)
 
 major=`echo $PACKAGE_VERSION |cut -d. -f1 | sed -e "s/[^0-9]//g"`
 minor=`echo $PACKAGE_VERSION |cut -d. -f2 | sed -e "s/[^0-9]//g"`
@@ -119,8 +119,13 @@ AC_ARG_WITH([jemalloc],
 
 AC_ARG_WITH([spdylay],
     [AS_HELP_STRING([--with-spdylay],
-                    [Use spdylay [default=check]])],
-    [request_spdylay=$withval], [request_spdylay=check])
+                    [Use spdylay [default=no]])],
+    [request_spdylay=$withval], [request_spdylay=no])
+
+AC_ARG_WITH([systemd],
+    [AS_HELP_STRING([--with-systemd],
+                    [Enable systemd support in nghttpx [default=check]])],
+    [request_systemd=$withval], [request_systemd=check])
 
 AC_ARG_WITH([mruby],
     [AS_HELP_STRING([--with-mruby],
@@ -395,6 +400,25 @@ else
   AC_MSG_NOTICE($JANSSON_PKG_ERRORS)
 fi
 
+
+#  libsystemd (for src/nghttpx)
+have_libsystemd=no
+if test "x${request_systemd}" != "xno"; then
+  PKG_CHECK_MODULES([SYSTEMD], [libsystemd >= 209], [have_libsystemd=yes],
+                    [have_libsystemd=no])
+  if test "x${have_libsystemd}" = "xyes"; then
+    AC_DEFINE([HAVE_LIBSYSTEMD], [1],
+              [Define to 1 if you have `libsystemd` library.])
+  else
+    AC_MSG_NOTICE($SYSTEMD_PKG_ERRORS)
+  fi
+fi
+
+if test "x${request_systemd}" = "xyes" &&
+   test "x${have_libsystemd}" != "xyes"; then
+  AC_MSG_ERROR([systemd was requested (--with-systemd) but not found])
+fi
+
 # libxml2 (for src/nghttp)
 PKG_CHECK_MODULES([LIBXML2], [libxml-2.0 >= 2.7.7],
                   [have_libxml2=yes], [have_libxml2=no])
@@ -914,6 +938,7 @@ AC_MSG_NOTICE([summary of build options:
       Jansson:        ${have_jansson} (CFLAGS='${JANSSON_CFLAGS}' LIBS='${JANSSON_LIBS}')
       Jemalloc:       ${have_jemalloc} (LIBS='${JEMALLOC_LIBS}')
       Zlib:           ${have_zlib} (CFLAGS='${ZLIB_CFLAGS}' LIBS='${ZLIB_LIBS}')
+      Systemd:        ${have_libsystemd} (CFLAGS='${SYSTEMD_CFLAGS}' LIBS='${SYSTEMD_LIBS}')
       Boost CPPFLAGS: ${BOOST_CPPFLAGS}
       Boost LDFLAGS:  ${BOOST_LDFLAGS}
       Boost::ASIO:    ${BOOST_ASIO_LIB}

contrib/nghttpx.service.in

@@ -1,10 +1,17 @@
 [Unit]
 Description=HTTP/2 proxy
+Documentation=man:nghttpx
 After=network.target
 
 [Service]
-Type=forking
-ExecStart=@bindir@/nghttpx --conf=/etc/nghttpx/nghttpx.conf --pid-file=/run/nghttpx.pid --daemon
+Type=notify
+ExecStart=@bindir@/nghttpx --conf=/etc/nghttpx/nghttpx.conf
+ExecReload=/bin/kill --signal HUP $MAINPID
+KillSignal=SIGQUIT
+PrivateTmp=yes
+ProtectHome=yes
+ProtectSystem=full
+Restart=always
 
 [Install]
 WantedBy=multi-user.target

doc/Makefile.am

@@ -62,6 +62,7 @@ APIDOCS= \
 	nghttp2_option_set_max_send_header_block_length.rst \
 	nghttp2_option_set_no_auto_ping_ack.rst \
 	nghttp2_option_set_no_auto_window_update.rst \
+	nghttp2_option_set_no_closed_streams.rst \
 	nghttp2_option_set_no_http_messaging.rst \
 	nghttp2_option_set_no_recv_client_magic.rst \
 	nghttp2_option_set_peer_max_concurrent_streams.rst \

doc/bash_completion/nghttpx

@@ -8,7 +8,7 @@ _nghttpx()
     _get_comp_words_by_ref cur prev
     case $cur in
         -*)
-            COMPREPLY=( $( compgen -W '--worker-read-rate --include --frontend-http2-dump-response-header --tls-ticket-key-file --verify-client-cacert --max-response-header-fields --backend-http2-window-size --frontend-keep-alive-timeout --backend-request-buffer --max-request-header-fields --fastopen --backend-connect-timeout --conf --dns-lookup-timeout --backend-http2-max-concurrent-streams --worker-write-burst --npn-list --dns-max-try --fetch-ocsp-response-file --no-via --tls-session-cache-memcached-cert-file --no-http2-cipher-black-list --mruby-file --client-no-http2-cipher-black-list --stream-read-timeout --client-ciphers --forwarded-for --accesslog-syslog --dns-cache-timeout --frontend-http2-read-timeout --listener-disable-timeout --ciphers --client-psk-secrets --strip-incoming-x-forwarded-for --no-server-rewrite --private-key-passwd-file --backend-keep-alive-timeout --backend-http-proxy-uri --rlimit-nofile --tls-ticket-key-memcached-cert-file --ocsp-update-interval --forwarded-by --tls-session-cache-memcached-private-key-file --error-page --backend-write-timeout --tls-dyn-rec-warmup-threshold --tls-ticket-key-memcached-max-retry --frontend-http2-window-size --http2-no-cookie-crumbling --worker-read-burst --dh-param-file --accesslog-format --errorlog-syslog --request-header-field-buffer --api-max-request-body --frontend-http2-decoder-dynamic-table-size --errorlog-file --frontend-http2-max-concurrent-streams --psk-secrets --frontend-write-timeout --tls-ticket-key-cipher --read-burst --backend --server-name --insecure --backend-max-backoff --log-level --host-rewrite --tls-proto-list --tls-ticket-key-memcached-interval --frontend-http2-setting-timeout --frontend-http2-connection-window-size --worker-frontend-connections --syslog-facility --no-server-push --no-location-rewrite --tls-session-cache-memcached --no-ocsp --frontend-http2-encoder-dynamic-table-size --workers --add-forwarded --worker-write-rate --add-request-header --backend-http2-settings-timeout --subcert --ecdh-curves --no-kqueue --help --frontend-frame-debug --tls-sct-dir --pid-file --frontend-http2-dump-request-header --daemon --write-rate --altsvc --backend-http2-decoder-dynamic-table-size --user --add-x-forwarded-for --frontend-read-timeout --tls-ticket-key-memcached-max-fail --backlog --write-burst --backend-connections-per-host --response-header-field-buffer --tls-ticket-key-memcached-address-family --padding --tls-session-cache-memcached-address-family --stream-write-timeout --cacert --tls-ticket-key-memcached-private-key-file --accesslog-write-early --backend-address-family --backend-http2-connection-window-size --version --add-response-header --backend-read-timeout --frontend-http2-optimize-window-size --frontend --accesslog-file --http2-proxy --backend-http2-encoder-dynamic-table-size --client-private-key-file --client-cert-file --tls-ticket-key-memcached --tls-dyn-rec-idle-timeout --frontend-http2-optimize-write-buffer-size --verify-client --backend-response-buffer --read-rate --backend-connections-per-frontend --strip-incoming-forwarded ' -- "$cur" ) )
+            COMPREPLY=( $( compgen -W '--worker-read-rate --include --frontend-http2-dump-response-header --tls-ticket-key-file --verify-client-cacert --max-response-header-fields --backend-http2-window-size --frontend-keep-alive-timeout --backend-request-buffer --max-request-header-fields --fastopen --backend-connect-timeout --tls-max-proto-version --conf --dns-lookup-timeout --backend-http2-max-concurrent-streams --worker-write-burst --npn-list --dns-max-try --fetch-ocsp-response-file --no-via --tls-session-cache-memcached-cert-file --no-http2-cipher-black-list --mruby-file --client-no-http2-cipher-black-list --stream-read-timeout --client-ciphers --forwarded-for --accesslog-syslog --dns-cache-timeout --frontend-http2-read-timeout --listener-disable-timeout --ciphers --client-psk-secrets --strip-incoming-x-forwarded-for --no-server-rewrite --private-key-passwd-file --backend-keep-alive-timeout --backend-http-proxy-uri --frontend-max-requests --rlimit-nofile --tls-ticket-key-memcached-cert-file --ocsp-update-interval --forwarded-by --tls-session-cache-memcached-private-key-file --error-page --backend-write-timeout --tls-dyn-rec-warmup-threshold --tls-ticket-key-memcached-max-retry --frontend-http2-window-size --http2-no-cookie-crumbling --worker-read-burst --dh-param-file --accesslog-format --errorlog-syslog --redirect-https-port --request-header-field-buffer --api-max-request-body --frontend-http2-decoder-dynamic-table-size --errorlog-file --frontend-http2-max-concurrent-streams --psk-secrets --frontend-write-timeout --tls-ticket-key-cipher --read-burst --backend --server-name --insecure --backend-max-backoff --log-level --host-rewrite --tls-ticket-key-memcached-interval --frontend-http2-setting-timeout --frontend-http2-connection-window-size --worker-frontend-connections --syslog-facility --no-server-push --no-location-rewrite --single-thread --tls-session-cache-memcached --no-ocsp --backend-response-buffer --tls-min-proto-version --workers --add-forwarded --worker-write-rate --add-request-header --backend-http2-settings-timeout --subcert --ecdh-curves --no-kqueue --help --frontend-frame-debug --tls-sct-dir --pid-file --frontend-http2-dump-request-header --daemon --write-rate --altsvc --backend-http2-decoder-dynamic-table-size --user --add-x-forwarded-for --frontend-read-timeout --tls-ticket-key-memcached-max-fail --backlog --write-burst --backend-connections-per-host --response-header-field-buffer --tls-ticket-key-memcached-address-family --padding --tls-session-cache-memcached-address-family --stream-write-timeout --cacert --tls-ticket-key-memcached-private-key-file --accesslog-write-early --backend-address-family --backend-http2-connection-window-size --version --add-response-header --backend-read-timeout --frontend-http2-optimize-window-size --frontend --accesslog-file --http2-proxy --backend-http2-encoder-dynamic-table-size --client-private-key-file --client-cert-file --tls-ticket-key-memcached --tls-dyn-rec-idle-timeout --frontend-http2-optimize-write-buffer-size --verify-client --frontend-http2-encoder-dynamic-table-size --read-rate --backend-connections-per-frontend --strip-incoming-forwarded ' -- "$cur" ) )
             ;;
         *)
             _filedir

doc/h2load.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "H2LOAD" "1" "Jan 25, 2017" "1.19.0" "nghttp2"
+.TH "H2LOAD" "1" "Feb 26, 2017" "1.20.0" "nghttp2"
 .SH NAME
 h2load \- HTTP/2 benchmarking tool
 .
@@ -131,7 +131,7 @@ Default: \fBECDHE\-ECDSA\-CHACHA20\-POLY1305:ECDHE\-RSA\-CHACHA20\-POLY1305:ECDH
 .B \-p, \-\-no\-tls\-proto=<PROTOID>
 Specify ALPN identifier of the  protocol to be used when
 accessing http URI without SSL/TLS.
-Available protocols: spdy/2, spdy/3, spdy/3.1, h2c and
+Available protocols: h2c and
 http/1.1
 .sp
 Default: \fBh2c\fP
@@ -233,7 +233,7 @@ NPN.  The parameter must be  delimited by a single comma
 only  and any  white spaces  are  treated as  a part  of
 protocol string.
 .sp
-Default: \fBh2,h2\-16,h2\-14,spdy/3.1,spdy/3,spdy/2,http/1.1\fP
+Default: \fBh2,h2\-16,h2\-14,http/1.1\fP
 .UNINDENT
 .INDENT 0.0
 .TP

doc/h2load.1.rst

@@ -102,7 +102,7 @@ OPTIONS
 
     Specify ALPN identifier of the  protocol to be used when
     accessing http URI without SSL/TLS.
-    Available protocols: spdy/2, spdy/3, spdy/3.1, h2c and
+    Available protocols: h2c and
     http/1.1
 
     Default: ``h2c``
@@ -196,7 +196,7 @@ OPTIONS
     only  and any  white spaces  are  treated as  a part  of
     protocol string.
 
-    Default: ``h2,h2-16,h2-14,spdy/3.1,spdy/3,spdy/2,http/1.1``
+    Default: ``h2,h2-16,h2-14,http/1.1``
 
 .. option:: --h1
 

doc/nghttp.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "NGHTTP" "1" "Jan 25, 2017" "1.19.0" "nghttp2"
+.TH "NGHTTP" "1" "Feb 26, 2017" "1.20.0" "nghttp2"
 .SH NAME
 nghttp \- HTTP/2 client
 .

doc/nghttpd.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "NGHTTPD" "1" "Jan 25, 2017" "1.19.0" "nghttp2"
+.TH "NGHTTPD" "1" "Feb 26, 2017" "1.20.0" "nghttp2"
 .SH NAME
 nghttpd \- HTTP/2 server
 .

doc/nghttpx.1

@@ -1,6 +1,6 @@
 .\" Man page generated from reStructuredText.
 .
-.TH "NGHTTPX" "1" "Jan 25, 2017" "1.19.0" "nghttp2"
+.TH "NGHTTPX" "1" "Feb 26, 2017" "1.20.0" "nghttp2"
 .SH NAME
 nghttpx \- HTTP/2 proxy
 .
@@ -121,12 +121,12 @@ Several parameters <PARAM> are accepted after <PATTERN>.
 The  parameters are  delimited  by  ";".  The  available
 parameters       are:      "proto=<PROTO>",       "tls",
 "sni=<SNI_HOST>",         "fall=<N>",        "rise=<N>",
-"affinity=<METHOD>", and "dns".   The parameter consists
-of keyword,  and optionally  followed by "="  and value.
-For example,  the parameter  "proto=h2" consists  of the
-keyword  "proto" and  value "h2".   The parameter  "tls"
-consists  of  the  keyword "tls"  without  value.   Each
-parameter is described as follows.
+"affinity=<METHOD>",  "dns", and  "redirect\-if\-not\-tls".
+The  parameter  consists   of  keyword,  and  optionally
+followed by  "=" and value.  For  example, the parameter
+"proto=h2"  consists of  the keyword  "proto" and  value
+"h2".  The parameter "tls" consists of the keyword "tls"
+without value.  Each parameter is described as follows.
 .sp
 The backend application protocol  can be specified using
 optional  "proto"   parameter,  and   in  the   form  of
@@ -183,6 +183,19 @@ frequently.   If  "dns"  is given,  name  resolution  of
 backend   host   name   at  start   up,   or   reloading
 configuration is skipped.
 .sp
+If "redirect\-if\-not\-tls" parameter  is used, the matched
+backend  requires   that  frontend  connection   is  TLS
+encrypted.  If it isn\(aqt, nghttpx responds to the request
+with 308  status code, and  https URI the  client should
+use instead  is included in Location  header field.  The
+port number in  redirect URI is 443 by  default, and can
+be  changed using  \fI\%\-\-redirect\-https\-port\fP option.   If at
+least one  backend has  "redirect\-if\-not\-tls" parameter,
+this feature is enabled  for all backend servers sharing
+the   same   <PATTERN>.    It    is   advised   to   set
+"redirect\-if\-no\-tls"    parameter   to    all   backends
+explicitly if this feature is desired.
+.sp
 Since ";" and ":" are  used as delimiter, <PATTERN> must
 not  contain these  characters.  Since  ";" has  special
 meaning in shell, the option value must be quoted.
@@ -267,6 +280,15 @@ Default: \fB1\fP
 .UNINDENT
 .INDENT 0.0
 .TP
+.B \-\-single\-thread
+Run everything in one  thread inside the worker process.
+This   feature   is   provided  for   better   debugging
+experience,  or  for  the platforms  which  lack  thread
+support.   If  threading  is disabled,  this  option  is
+always enabled.
+.UNINDENT
+.INDENT 0.0
+.TP
 .B \-\-read\-rate=<SIZE>
 Set maximum  average read  rate on  frontend connection.
 Setting 0 to this option means read rate is unlimited.
@@ -453,7 +475,7 @@ Default: \fB0\fP
 Specify write  timeout for  HTTP/2 and SPDY  streams.  0
 means no timeout.
 .sp
-Default: \fB0\fP
+Default: \fB1m\fP
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -579,9 +601,14 @@ password protected it\(aqll be requested interactively.
 .B \-\-subcert=<KEYPATH>:<CERTPATH>[[;<PARAM>]...]
 Specify  additional certificate  and  private key  file.
 nghttpx will  choose certificates based on  the hostname
-indicated  by  client  using TLS  SNI  extension.   This
-option  can  be  used  multiple  times.   To  make  OCSP
-stapling work, <CERTPATH> must be absolute path.
+indicated by client using TLS SNI extension.  If nghttpx
+is  built with  OpenSSL >=  1.0.2, signature  algorithms
+(e.g., ECDSA+SHA256, RSA+SHA256) presented by client are
+also taken  into consideration.  This allows  nghttpx to
+send ECDSA certificate to  modern clients, while sending
+RSA based certificate to older clients.  This option can
+be  used multiple  times.  To  make OCSP  stapling work,
+<CERTPATH> must be absolute path.
 .sp
 Additional parameter  can be specified in  <PARAM>.  The
 available <PARAM> is "sct\-dir=<DIR>".
@@ -609,7 +636,7 @@ NPN.  The parameter must be  delimited by a single comma
 only  and any  white spaces  are  treated as  a part  of
 protocol string.
 .sp
-Default: \fBh2,h2\-16,h2\-14,spdy/3.1,http/1.1\fP
+Default: \fBh2,h2\-16,h2\-14,http/1.1\fP
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -637,18 +664,29 @@ backend client authentication.
 .UNINDENT
 .INDENT 0.0
 .TP
-.B \-\-tls\-proto\-list=<LIST>
-Comma delimited list of  SSL/TLS protocol to be enabled.
-The following protocols  are available: TLSv1.2, TLSv1.1
-and   TLSv1.0.    The   name   matching   is   done   in
-case\-insensitive   manner.    The  parameter   must   be
-delimited by  a single comma  only and any  white spaces
-are  treated  as a  part  of  protocol string.   If  the
-protocol list advertised by client does not overlap this
-list,  you  will  receive  the  error  message  "unknown
-protocol".
+.B \-\-tls\-min\-proto\-version=<VER>
+Specify minimum SSL/TLS protocol.   The name matching is
+done in  case\-insensitive manner.  The  versions between
+\fI\%\-\-tls\-min\-proto\-version\fP and  \fI\%\-\-tls\-max\-proto\-version\fP are
+enabled.  If the protocol list advertised by client does
+not  overlap  this range,  you  will  receive the  error
+message "unknown protocol".  The available versions are:
+TLSv1.2, TLSv1.1, and TLSv1.0
 .sp
-Default: \fBTLSv1.2,TLSv1.1\fP
+Default: \fBTLSv1.1\fP
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-tls\-max\-proto\-version=<VER>
+Specify maximum SSL/TLS protocol.   The name matching is
+done in  case\-insensitive manner.  The  versions between
+\fI\%\-\-tls\-min\-proto\-version\fP and  \fI\%\-\-tls\-max\-proto\-version\fP are
+enabled.  If the protocol list advertised by client does
+not  overlap  this range,  you  will  receive the  error
+message "unknown protocol".  The available versions are:
+TLSv1.2, TLSv1.1, and TLSv1.0
+.sp
+Default: \fBTLSv1.2\fP
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1313,7 +1351,7 @@ backend server, the custom error pages are not used.
 .B \-\-server\-name=<NAME>
 Change server response header field value to <NAME>.
 .sp
-Default: \fBnghttpx nghttp2/1.19.0\fP
+Default: \fBnghttpx\fP
 .UNINDENT
 .INDENT 0.0
 .TP
@@ -1322,6 +1360,15 @@ Don\(aqt rewrite server header field in default mode.  When
 \fI\%\-\-http2\-proxy\fP is used, these headers will not be altered
 regardless of this option.
 .UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-redirect\-https\-port=<PORT>
+Specify the port number which appears in Location header
+field  when  redirect  to  HTTPS  URI  is  made  due  to
+"redirect\-if\-not\-tls" parameter in \fI\%\-\-backend\fP option.
+.sp
+Default: \fB443\fP
+.UNINDENT
 .SS API
 .INDENT 0.0
 .TP
@@ -1357,6 +1404,16 @@ lookup.
 .sp
 Default: \fB2\fP
 .UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-frontend\-max\-requests=<N>
+The number  of requests that single  frontend connection
+can process.  For HTTP/2, this  is the number of streams
+in  one  HTTP/2 connection.   For  HTTP/1,  this is  the
+number of keep alive requests.  This is hint to nghttpx,
+and it  may allow additional few  requests.  The default
+value is unlimited.
+.UNINDENT
 .SS Debug
 .INDENT 0.0
 .TP
@@ -1538,16 +1595,23 @@ Reload configuration file given in \fI\%\-\-conf\fP\&.
 .TP
 .B SIGUSR1
 Reopen log files.
-.TP
-.B SIGUSR2
+.UNINDENT
+.sp
+SIGUSR2
+.INDENT 0.0
+.INDENT 3.5
 Fork and execute nghttpx.  It will execute the binary in the same
-path with same command\-line arguments and environment variables.
-After new process comes up, sending SIGQUIT to the original process
-to perform hot swapping.  The difference between SIGUSR2 + SIGQUIT
-and SIGHUP is that former is usually used to execute new binary, and
-the master process is newly spawned.  On the other hand, the latter
-just reloads configuration file, and the same master process
-continues to exist.
+path with same command\-line arguments and environment variables.  As
+of nghttpx version 1.20.0, the new master process sends SIGQUIT to
+the original master process when it is ready to serve requests.  For
+the earlier versions of nghttpx, user has to send SIGQUIT to the
+original master process.
+.sp
+The difference between SIGUSR2 (+ SIGQUIT) and SIGHUP is that former
+is usually used to execute new binary, and the master process is
+newly spawned.  On the other hand, the latter just reloads
+configuration file, and the same master process continues to exist.
+.UNINDENT
 .UNINDENT
 .sp
 \fBNOTE:\fP
@@ -1968,6 +2032,19 @@ completely custom header fields, first call
 existing header fields, and then add required header fields.
 It is an error to call this method twice for a given request.
 .UNINDENT
+.INDENT 7.0
+.TP
+.B send_info(status, headers)
+Send non\-final (informational) response to a client.  \fIstatus\fP
+must be in the range [100, 199], inclusive.  \fIheaders\fP is a
+hash containing response header fields.  Its key must be a
+string, and the associated value must be either string or
+array of strings.  Since this is not a final response, even if
+this method is invoked, request is still forwarded to a
+backend unless \fI\%Nghttpx::Response#return\fP is called.
+This method can be called multiple times.  It cannot be called
+after \fI\%Nghttpx::Response#return\fP is called.
+.UNINDENT
 .UNINDENT
 .SS MRUBY EXAMPLES
 .sp
@@ -2043,15 +2120,18 @@ The request was failed.  No change has been made.
 HTTP status code
 .UNINDENT
 .sp
+Additionally, depending on the API endpoint, \fBdata\fP key may be
+present, and its value contains the API endpoint specific data.
+.sp
 We wrote "normally", since nghttpx may return ordinal HTML response in
 some cases where the error has occurred before reaching API endpoint
 (e.g., header field is too large).
 .sp
 The following section describes available API endpoints.
-.SS PUT /api/v1beta1/backendconfig
+.SS POST /api/v1beta1/backendconfig
 .sp
 This API replaces the current backend server settings with the
-requested ones.  The request method should be PUT, but POST is also
+requested ones.  The request method should be POST, but PUT is also
 acceptable.  The request body must be nghttpx configuration file
 format.  For configuration file format, see \fI\%FILES\fP section.  The
 line separator inside the request body must be single LF (0x0A).
@@ -2070,6 +2150,24 @@ The one limitation is that only numeric IP address is allowd in
 \fI\%backend\fP in request body unless "dns" parameter
 is used while non numeric hostname is allowed in command\-line or
 configuration file is read using \fI\%\-\-conf\fP\&.
+.SS GET /api/v1beta1/configrevision
+.sp
+This API returns configuration revision of the current nghttpx.  The
+configuration revision is opaque string, and it changes after each
+reloading by SIGHUP.  With this API, an external application knows
+that whether nghttpx has finished reloading its configuration by
+comparing the configuration revisions between before and after
+reloading.  It is recommended to disable persistent (keep\-alive)
+connection for this purpose in order to avoid to send a request using
+the reused connection which may bound to an old process.
+.sp
+This API returns response including \fBdata\fP key.  Its value is JSON
+object, and it contains at least the following key:
+.INDENT 0.0
+.TP
+.B configRevision
+The configuration revision of the current nghttpx
+.UNINDENT
 .SH SEE ALSO
 .sp
 \fBnghttp(1)\fP, \fBnghttpd(1)\fP, \fBh2load(1)\fP

doc/nghttpx.1.rst

@@ -105,12 +105,12 @@ Connections
     The  parameters are  delimited  by  ";".  The  available
     parameters       are:      "proto=<PROTO>",       "tls",
     "sni=<SNI_HOST>",         "fall=<N>",        "rise=<N>",
-    "affinity=<METHOD>", and "dns".   The parameter consists
-    of keyword,  and optionally  followed by "="  and value.
-    For example,  the parameter  "proto=h2" consists  of the
-    keyword  "proto" and  value "h2".   The parameter  "tls"
-    consists  of  the  keyword "tls"  without  value.   Each
-    parameter is described as follows.
+    "affinity=<METHOD>",  "dns", and  "redirect-if-not-tls".
+    The  parameter  consists   of  keyword,  and  optionally
+    followed by  "=" and value.  For  example, the parameter
+    "proto=h2"  consists of  the keyword  "proto" and  value
+    "h2".  The parameter "tls" consists of the keyword "tls"
+    without value.  Each parameter is described as follows.
 
     The backend application protocol  can be specified using
     optional  "proto"   parameter,  and   in  the   form  of
@@ -167,6 +167,19 @@ Connections
     backend   host   name   at  start   up,   or   reloading
     configuration is skipped.
 
+    If "redirect-if-not-tls" parameter  is used, the matched
+    backend  requires   that  frontend  connection   is  TLS
+    encrypted.  If it isn't, nghttpx responds to the request
+    with 308  status code, and  https URI the  client should
+    use instead  is included in Location  header field.  The
+    port number in  redirect URI is 443 by  default, and can
+    be  changed using  :option:`--redirect-https-port` option.   If at
+    least one  backend has  "redirect-if-not-tls" parameter,
+    this feature is enabled  for all backend servers sharing
+    the   same   <PATTERN>.    It    is   advised   to   set
+    "redirect-if-no-tls"    parameter   to    all   backends
+    explicitly if this feature is desired.
+
     Since ";" and ":" are  used as delimiter, <PATTERN> must
     not  contain these  characters.  Since  ";" has  special
     meaning in shell, the option value must be quoted.
@@ -249,6 +262,14 @@ Performance
 
     Default: ``1``
 
+.. option:: --single-thread
+
+    Run everything in one  thread inside the worker process.
+    This   feature   is   provided  for   better   debugging
+    experience,  or  for  the platforms  which  lack  thread
+    support.   If  threading  is disabled,  this  option  is
+    always enabled.
+
 .. option:: --read-rate=<SIZE>
 
     Set maximum  average read  rate on  frontend connection.
@@ -418,7 +439,7 @@ Timeout
     Specify write  timeout for  HTTP/2 and SPDY  streams.  0
     means no timeout.
 
-    Default: ``0``
+    Default: ``1m``
 
 .. option:: --backend-read-timeout=<DURATION>
 
@@ -532,9 +553,14 @@ SSL/TLS
 
     Specify  additional certificate  and  private key  file.
     nghttpx will  choose certificates based on  the hostname
-    indicated  by  client  using TLS  SNI  extension.   This
-    option  can  be  used  multiple  times.   To  make  OCSP
-    stapling work, <CERTPATH> must be absolute path.
+    indicated by client using TLS SNI extension.  If nghttpx
+    is  built with  OpenSSL >=  1.0.2, signature  algorithms
+    (e.g., ECDSA+SHA256, RSA+SHA256) presented by client are
+    also taken  into consideration.  This allows  nghttpx to
+    send ECDSA certificate to  modern clients, while sending
+    RSA based certificate to older clients.  This option can
+    be  used multiple  times.  To  make OCSP  stapling work,
+    <CERTPATH> must be absolute path.
 
     Additional parameter  can be specified in  <PARAM>.  The
     available <PARAM> is "sct-dir=<DIR>".
@@ -560,7 +586,7 @@ SSL/TLS
     only  and any  white spaces  are  treated as  a part  of
     protocol string.
 
-    Default: ``h2,h2-16,h2-14,spdy/3.1,http/1.1``
+    Default: ``h2,h2-16,h2-14,http/1.1``
 
 .. option:: --verify-client
 
@@ -582,19 +608,29 @@ SSL/TLS
     Path to  file that  contains client certificate  used in
     backend client authentication.
 
-.. option:: --tls-proto-list=<LIST>
+.. option:: --tls-min-proto-version=<VER>
 
-    Comma delimited list of  SSL/TLS protocol to be enabled.
-    The following protocols  are available: TLSv1.2, TLSv1.1
-    and   TLSv1.0.    The   name   matching   is   done   in
-    case-insensitive   manner.    The  parameter   must   be
-    delimited by  a single comma  only and any  white spaces
-    are  treated  as a  part  of  protocol string.   If  the
-    protocol list advertised by client does not overlap this
-    list,  you  will  receive  the  error  message  "unknown
-    protocol".
+    Specify minimum SSL/TLS protocol.   The name matching is
+    done in  case-insensitive manner.  The  versions between
+    :option:`--tls-min-proto-version` and  :option:`\--tls-max-proto-version` are
+    enabled.  If the protocol list advertised by client does
+    not  overlap  this range,  you  will  receive the  error
+    message "unknown protocol".  The available versions are:
+    TLSv1.2, TLSv1.1, and TLSv1.0
 
-    Default: ``TLSv1.2,TLSv1.1``
+    Default: ``TLSv1.1``
+
+.. option:: --tls-max-proto-version=<VER>
+
+    Specify maximum SSL/TLS protocol.   The name matching is
+    done in  case-insensitive manner.  The  versions between
+    :option:`--tls-min-proto-version` and  :option:`\--tls-max-proto-version` are
+    enabled.  If the protocol list advertised by client does
+    not  overlap  this range,  you  will  receive the  error
+    message "unknown protocol".  The available versions are:
+    TLSv1.2, TLSv1.1, and TLSv1.0
+
+    Default: ``TLSv1.2``
 
 .. option:: --tls-ticket-key-file=<PATH>
 
@@ -1188,7 +1224,7 @@ HTTP
 
     Change server response header field value to <NAME>.
 
-    Default: ``nghttpx nghttp2/1.19.0``
+    Default: ``nghttpx``
 
 .. option:: --no-server-rewrite
 
@@ -1196,6 +1232,14 @@ HTTP
     :option:`--http2-proxy` is used, these headers will not be altered
     regardless of this option.
 
+.. option:: --redirect-https-port=<PORT>
+
+    Specify the port number which appears in Location header
+    field  when  redirect  to  HTTPS  URI  is  made  due  to
+    "redirect-if-not-tls" parameter in :option:`--backend` option.
+
+    Default: ``443``
+
 
 API
 ~~~
@@ -1233,6 +1277,15 @@ DNS
 
     Default: ``2``
 
+.. option:: --frontend-max-requests=<N>
+
+    The number  of requests that single  frontend connection
+    can process.  For HTTP/2, this  is the number of streams
+    in  one  HTTP/2 connection.   For  HTTP/1,  this is  the
+    number of keep alive requests.  This is hint to nghttpx,
+    and it  may allow additional few  requests.  The default
+    value is unlimited.
+
 
 Debug
 ~~~~~
@@ -1405,14 +1458,18 @@ SIGUSR1
   Reopen log files.
 
 SIGUSR2
+
   Fork and execute nghttpx.  It will execute the binary in the same
-  path with same command-line arguments and environment variables.
-  After new process comes up, sending SIGQUIT to the original process
-  to perform hot swapping.  The difference between SIGUSR2 + SIGQUIT
-  and SIGHUP is that former is usually used to execute new binary, and
-  the master process is newly spawned.  On the other hand, the latter
-  just reloads configuration file, and the same master process
-  continues to exist.
+  path with same command-line arguments and environment variables.  As
+  of nghttpx version 1.20.0, the new master process sends SIGQUIT to
+  the original master process when it is ready to serve requests.  For
+  the earlier versions of nghttpx, user has to send SIGQUIT to the
+  original master process.
+
+  The difference between SIGUSR2 (+ SIGQUIT) and SIGHUP is that former
+  is usually used to execute new binary, and the master process is
+  newly spawned.  On the other hand, the latter just reloads
+  configuration file, and the same master process continues to exist.
 
 .. note::
 
@@ -1804,6 +1861,18 @@ respectively.
         existing header fields, and then add required header fields.
         It is an error to call this method twice for a given request.
 
+    .. rb:method:: send_info(status, headers)
+
+        Send non-final (informational) response to a client.  *status*
+        must be in the range [100, 199], inclusive.  *headers* is a
+        hash containing response header fields.  Its key must be a
+        string, and the associated value must be either string or
+        array of strings.  Since this is not a final response, even if
+        this method is invoked, request is still forwarded to a
+        backend unless :rb:meth:`Nghttpx::Response#return` is called.
+        This method can be called multiple times.  It cannot be called
+        after :rb:meth:`Nghttpx::Response#return` is called.
+
 MRUBY EXAMPLES
 ~~~~~~~~~~~~~~
 
@@ -1865,17 +1934,20 @@ status
 code
   HTTP status code
 
+Additionally, depending on the API endpoint, ``data`` key may be
+present, and its value contains the API endpoint specific data.
+
 We wrote "normally", since nghttpx may return ordinal HTML response in
 some cases where the error has occurred before reaching API endpoint
 (e.g., header field is too large).
 
 The following section describes available API endpoints.
 
-PUT /api/v1beta1/backendconfig
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+POST /api/v1beta1/backendconfig
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 This API replaces the current backend server settings with the
-requested ones.  The request method should be PUT, but POST is also
+requested ones.  The request method should be POST, but PUT is also
 acceptable.  The request body must be nghttpx configuration file
 format.  For configuration file format, see `FILES`_ section.  The
 line separator inside the request body must be single LF (0x0A).
@@ -1896,6 +1968,25 @@ The one limitation is that only numeric IP address is allowd in
 is used while non numeric hostname is allowed in command-line or
 configuration file is read using :option:`--conf`.
 
+GET /api/v1beta1/configrevision
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This API returns configuration revision of the current nghttpx.  The
+configuration revision is opaque string, and it changes after each
+reloading by SIGHUP.  With this API, an external application knows
+that whether nghttpx has finished reloading its configuration by
+comparing the configuration revisions between before and after
+reloading.  It is recommended to disable persistent (keep-alive)
+connection for this purpose in order to avoid to send a request using
+the reused connection which may bound to an old process.
+
+This API returns response including ``data`` key.  Its value is JSON
+object, and it contains at least the following key:
+
+configRevision
+  The configuration revision of the current nghttpx
+
+
 SEE ALSO
 --------
 

doc/nghttpx.h2r

@@ -83,14 +83,18 @@ SIGUSR1
   Reopen log files.
 
 SIGUSR2
+
   Fork and execute nghttpx.  It will execute the binary in the same
-  path with same command-line arguments and environment variables.
-  After new process comes up, sending SIGQUIT to the original process
-  to perform hot swapping.  The difference between SIGUSR2 + SIGQUIT
-  and SIGHUP is that former is usually used to execute new binary, and
-  the master process is newly spawned.  On the other hand, the latter
-  just reloads configuration file, and the same master process
-  continues to exist.
+  path with same command-line arguments and environment variables.  As
+  of nghttpx version 1.20.0, the new master process sends SIGQUIT to
+  the original master process when it is ready to serve requests.  For
+  the earlier versions of nghttpx, user has to send SIGQUIT to the
+  original master process.
+
+  The difference between SIGUSR2 (+ SIGQUIT) and SIGHUP is that former
+  is usually used to execute new binary, and the master process is
+  newly spawned.  On the other hand, the latter just reloads
+  configuration file, and the same master process continues to exist.
 
 .. note::
 
@@ -482,6 +486,18 @@ respectively.
         existing header fields, and then add required header fields.
         It is an error to call this method twice for a given request.
 
+    .. rb:method:: send_info(status, headers)
+
+        Send non-final (informational) response to a client.  *status*
+        must be in the range [100, 199], inclusive.  *headers* is a
+        hash containing response header fields.  Its key must be a
+        string, and the associated value must be either string or
+        array of strings.  Since this is not a final response, even if
+        this method is invoked, request is still forwarded to a
+        backend unless :rb:meth:`Nghttpx::Response#return` is called.
+        This method can be called multiple times.  It cannot be called
+        after :rb:meth:`Nghttpx::Response#return` is called.
+
 MRUBY EXAMPLES
 ~~~~~~~~~~~~~~
 
@@ -543,6 +559,9 @@ status
 code
   HTTP status code
 
+Additionally, depending on the API endpoint, ``data`` key may be
+present, and its value contains the API endpoint specific data.
+
 We wrote "normally", since nghttpx may return ordinal HTML response in
 some cases where the error has occurred before reaching API endpoint
 (e.g., header field is too large).
@@ -574,6 +593,25 @@ The one limitation is that only numeric IP address is allowd in
 is used while non numeric hostname is allowed in command-line or
 configuration file is read using :option:`--conf`.
 
+GET /api/v1beta1/configrevision
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This API returns configuration revision of the current nghttpx.  The
+configuration revision is opaque string, and it changes after each
+reloading by SIGHUP.  With this API, an external application knows
+that whether nghttpx has finished reloading its configuration by
+comparing the configuration revisions between before and after
+reloading.  It is recommended to disable persistent (keep-alive)
+connection for this purpose in order to avoid to send a request using
+the reused connection which may bound to an old process.
+
+This API returns response including ``data`` key.  Its value is JSON
+object, and it contains at least the following key:
+
+configRevision
+  The configuration revision of the current nghttpx
+
+
 SEE ALSO
 --------
 

doc/sources/building-android-binary.rst

@@ -38,9 +38,6 @@ Although zlib comes with Android NDK, it seems not to be a part of
 public API, so we have to built it for our own.  That also provides us
 proper .pc file as a bonus.
 
-If SPDY support is required for nghttpx and h2load, build and install
-spdylay as well.
-
 Before running ``android-config`` and ``android-make``,
 ``ANDROID_HOME`` environment variable must be set to point to the
 correct path.  Also add ``$ANDROID_HOME/toolchain/bin`` to ``PATH``:
@@ -146,34 +143,6 @@ To configure zlib, use the following script:
 
 And run ``make install`` to build and install.
 
-To configure spdylay, use the following script:
-
-.. code-block:: sh
-
-    #!/bin/sh -e
-
-    if [ -z "$ANDROID_HOME" ]; then
-        echo 'No $ANDROID_HOME specified.'
-        exit 1
-    fi
-    PREFIX=$ANDROID_HOME/usr/local
-    TOOLCHAIN=$ANDROID_HOME/toolchain
-    PATH=$TOOLCHAIN/bin:$PATH
-
-    ./configure \
-        --disable-shared \
-        --host=arm-linux-androideabi \
-        --build=`dpkg-architecture -qDEB_BUILD_GNU_TYPE` \
-        --prefix=$PREFIX \
-        --without-libxml2 \
-        --disable-src \
-        --disable-examples \
-        CPPFLAGS="-I$PREFIX/include" \
-        PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig" \
-        LDFLAGS="-L$PREFIX/lib"
-
-And run ``make install`` to build and install.
-
 After prerequisite libraries are prepared, run ``android-config`` and
 then ``android-make`` to compile nghttp2 source files.
 

doc/sources/nghttpx-howto.rst

@@ -229,12 +229,18 @@ Hot swapping
 nghttpx supports hot swapping using signals.  The hot swapping in
 nghttpx is multi step process.  First send USR2 signal to nghttpx
 process.  It will do fork and execute new executable, using same
-command-line arguments and environment variables.  At this point, both
-current and new processes can accept requests.  To gracefully shutdown
-current process, send QUIT signal to current nghttpx process.  When
-all existing frontend connections are done, the current process will
-exit.  At this point, only new nghttpx process exists and serves
-incoming requests.
+command-line arguments and environment variables.
+
+As of nghttpx version 1.20.0, that is all you have to do.  The new
+master process sends QUIT signal to the original process, when it is
+ready to serve requests, to shut it down gracefully.
+
+For earlier versions of nghttpx, you have to do one more thing.  At
+this point, both current and new processes can accept requests.  To
+gracefully shutdown current process, send QUIT signal to current
+nghttpx process.  When all existing frontend connections are done, the
+current process will exit.  At this point, only new nghttpx process
+exists and serves incoming requests.
 
 If you want to just reload configuration file without executing new
 binary, send SIGHUP to nghttpx master process.

fuzz/README.rst

@@ -0,0 +1,33 @@
+Fuzzer
+======
+
+This directory contains fuzzer target mainly written to integrate
+nghttp2 into `oss-fuzz <https://github.com/google/oss-fuzz>`_.
+
+fuzz_target.cc contains an entry point of fuzzer.  corpus directory
+contains initial data for fuzzer.
+
+The file name of initial data under corpus is the lower-cased hex
+string of SHA-256 hash of its own content.
+
+corpus/h2spec contains input data which was recorded when we ran
+`h2spec <https://github.com/summerwind/h2spec>`_ against nghttpd.
+
+corpus/nghttp contains input data which was recorded when we ran
+nghttp against nghttpd with some varying command line options of
+nghttp.
+
+
+To build fuzz_target.cc, make sure that libnghttp2 is built with
+following compiler/linker flags:
+
+.. code-block:: text
+
+    CPPFLAGS="-fsanitize-coverage=edge -fsanitize=addres"
+    LDFLAGS="-fsanitize-coverage=edge -fsanitize=addres"
+
+Then, fuzz_target.cc can be built using the following command:
+
+.. code-block:: text
+
+    $ clang++ -fsanitize-coverage=edge -fsanitize=address -I../lib/includes -std=c++11 fuzz_target.cc ../lib/.libs/libnghttp2.a  /usr/lib/llvm-3.9/lib/libFuzzer.a -o nghttp2_fuzzer

fuzz/corpus/h2spec/0b39d9df6e1721030667980a41547272ad42377149edcf130b2bf0b76804c61f

@@ -0,0 +1,2 @@
+INVALID CONNECTION PREFACE
+